Wheel fitment calculator

Compare the wheels you have with the ones you want. See how far the new wheel sticks out, how close it gets to the suspension, and what your speedometer will read.

Your vehicle
Wheel
in
in
mm
Tire
mm
%

The small mark on each slider shows the current value. Type in the box for sizes outside the slider range.

Front section
StrutBrakeFender149.3Backspacing79.3 Frontspacing7.7 closer17.7 poke
Three-quarter view
235/40R18
New setupCurrent setupFender and strut are drawn 12 mm outside and 28 mm inside your current setup. Add your own measurements for real clearance.
Poke
+17.7mm
Wheel face sits further out toward the fender.
Inner clearance
−7.7mm
Inner barrel moves toward the strut.
Overall diameter
0%
0 in, within ±3%.
Speedo reads 60
60mph
Your actual speed.
VehicleNot selected
Bolt pattern–Hub bore–
Current18×8 ET40, 235/40R18New18×9 ET35, 235/40R18
Custom vehicle measurementsOptional

Measure with your current wheels on the car and the results below show how much room the new setup leaves. The drawings use your numbers too. Leave blank anything you haven't measured.

  • Park on level ground at normal ride height, wheels straight.
  • Front and rear differ. Measure the axle you're changing, or enter the tighter corner.
ABCD

Millimetres or centimetres are recommended: small gaps are easier to read accurately than inch marks.

mm

Narrowest gap between the inside of the tire (or wheel, whichever sits further in) and the strut, spring perch or upper control arm. Wheels pointed straight.

mm

Hang a plumb line or hold a straightedge vertically from the fender lip above the hub, then measure across to the outermost point of the tire or wheel. Enter a negative number if it already sticks out.

mm

Straight up from the top of the tire to the fender lip, with the car on the ground at normal ride height.

mm

Smallest gap between the outer edge of the brake caliper and the inside of the wheel barrel.

Shop this setup

I may earn a commission from links on this page.

Pick a vehicle or enter a bolt pattern (for example 5x114.3) to search retailers for this setup.

Vehicle fitment guides

Stock specs, popular upgrade sizes and known rubbing points for each car.

VehicleGenerationBolt patternHub bore
2015–2023 Dodge ChallengerLA5x11571.5 mm
2015–2023 Dodge ChargerLD5x11571.5 mm
2015–2023 Ford MustangS5505x114.370.5 mm
2015–2021 Subaru WRXVA5x114.356.1 mm
2022+ Toyota GR86ZN85x10056.1 mm
2013–2020 Subaru BRZZC65x10056.1 mm
2016–2021 Honda Civic10th gen (FC/FK)5x114.364.1 mm
2018+ Jeep WranglerJL5x12771.5 mm

All guides by make